ApplicationIt can be used to immediately empty the pool, empty the flooded basement, pump out the flooded ditch, fill or empty the water storage tank or reservoir, irrigate the field, flush the construction site with hose, etc.Specification Material: Aluminum Alloy and Cast IronColor: Black+RedEngine Type: QS168F-1 Water Pump Inlet/Outlet: 3in Engine Type: 4-Stroke 210cc Max.Head: 28m/91.86ftSuction Head: 8m/26.25ftFlow: 60m³/hHorsepower: 7.5HpSelf-primintimes(s/4m):120Rated Output Power:5.5KWTank Capacity: 3L/0.79GALSpeed: 3600r/minNet Weight28.12kg(61.99lb)Product Size: 47*37*39cm/18.5*14.57*15.3inPackage Size: 51*39*43cm/20*15.4*16.9inPackage Included1*Water Transfer Pump1*Intake Strainer1*Hose Clamps1*Spark Plug Wrench1* ManualNotes1. Please note that the hose is not included in the package.2. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.3.Troubleshooting items：The pump can not pump water: the suction range of the pump is less than 7 meters to ensure that the water connection does not leak, the pump to add water (not self-priming pump), start the engine after the accelerator to wait patiently; Water inlet pipe because the suction of the pump is large, so there must be hardness, can not be dented;Pump leakage: excessive pressure leads to leakage of sealant pad, which can be sealed by winding raw material beltWater spraying in the pump seal: remove the four screws of the pump case, see the rubber seal ring inside, reinstall the pump case, tighten the screws.